zero insertion force การใช้
- Some sockets include a zero insertion force mechanism.
- The Power PC 750 chip that drives the system is fitted onto a zero insertion force ( ZIF ) socket.
- Devices with hundreds of leads may be inserted in zero insertion force sockets, which are also used on test equipment or device programmers.
- The Alpha microprocessor was socketed in a zero insertion force ( ZIF ) 21174 "'chipset, also known as the " Pyxis " chipset.
- Initially, the LIF connectors were designed as a cheaper alternative compared to zero insertion force ( ZIF ) connectors, to facilitate programming and testing of equipment.
- For chips with a large number of pins, either zero insertion force ( ZIF ) sockets or land grid array ( LGA ) sockets are used instead.
- The chip then eases right out, thanks to something called a Zero Insertion Force ( ZIF ) socket that uses a small lever to open and tighten the holes.
- FC-PGA processors fit into zero insertion force ( ZIF ) Socket 370 and Socket 478-based motherboard sockets; similar packages have also been used by AMD . It is still used today for mobile Intel processors.
- The Nintendo Entertainment System was unusual in that it was designed to use a zero insertion force edge connector : instead of the user forcing the cartridge into the socket directly, the cartridge was first placed in a bay and then mechanically lowered into position.
- Socket 2 was a 238-pin low insertion force ( LIF ) or zero insertion force ( ZIF ) 19?9 pin grid array ( PGA ) socket suitable for the 5-volt, 25 to 50 MHz 486 SX, 486 DX, 486 DX2, 486 OverDrive and 63 or 83 MHz Pentium OverDrive processors.
- Socket 3 was a 237-pin low insertion force ( LIF ) or zero insertion force ( ZIF ) 19?9 pin grid array ( PGA ) socket suitable for the 3.3 V and 5 V, 25 50 MHz Intel 486 SX, 486 DX, 486 DX2, 486 DX4, 486 OverDrive and Pentium OverDrive processors as well as AMD Am486, Am5x86 and Cyrix Cx5x86 processors.